LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Continuously Variable Transaxle (CVT) (H6DO)) >> Rear Drive Shaft >> Assembly

Rear Drive Shaft: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, install the ball bearing.
NOTE:
  • Use a new ball bearing.
  • Apply CVTF to press-fitting surface of ball bearing.

ST 399513600 INSTALLER

Fig 1: Installing Ball Bearing
G06654506Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals