LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Continuously Variable Transaxle (CVT) (H6DO)) >> Oil Pump Chain >> Assembly >> Drive Sprocket

Drive Sprocket

WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, install the ball bearing.
NOTE: Use a new ball bearing.

ST 499755602 PRESS SNAP RING

Fig 1: Installing Ball Bearing
G06654752Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals