Drive Pinion Shaft Assembly: Inspection
WARNING: This page is about a different variant/trim than selected.
- Make sure that all component parts are free of scratches, holes and other faults.
- Check the tooth contact. Ref. to ADJUSTMENT , Drive Pinion Shaft Assembly.
- Apply CVTF to bearing and rotate the bearing to check for noise or dragging etc.
- Check the bearing preload of drive pinion shaft.
CAUTION:
Before measuring, apply differential gear oil to roller of bearing and rotate the bearing several times.
Starting torque:
16.3 - 42.7 N (1.7 - 4.4 kgf, 4.4 - 9.6 lbf)