LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Continuously Variable Transaxle (CVT) (H6DO)) >> CVTF Cooler (Air Cooling) >> Installation

CVTF Cooler (Air Cooling): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the CVTF cooler (air cool).

    Tightening torque: 

    12 N.m (1.2 kgf-m, 8.9 ft-lb) 

  2. Install the CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose.
    NOTE: Use new CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose.
  3. Install the headlight assembly LH. Ref. to INSTALLATION , Headlight Assembly.
  4. Install the front bumper. Ref. to INSTALLATION , Front Bumper.
  5. Install the battery. Ref. to INSTALLATION , Battery.
scientia non olet · About LEMON Manuals