LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Continuously Variable Transaxle (CVT) (H6DO)) >> Air Breather Hose >> Installation

Air Breather Hose: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the oil cap.
    NOTE: Use new O-rings.
  2. Install the two air breather hoses.
  3. Install the air intake boot. Ref. to INSTALLATION , Air Intake Boot.
  4. Connect the ground terminal to battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
  5. Install the collector cover.
scientia non olet · About LEMON Manuals