LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H6DO)) >> General Description >> Preparation Tool >> Special Tool

Special Tool

WARNING: This page is about a different variant/trim than selected.
ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G05018634
 18250AA010 CYLINDER HEAD TABLE
  • Used for replacing valve guides.
  • Used for removing and installing valve spring.
G05018635
 18232AA000 ENGINE STAND Used for disassembling and assembling engine.
G05002451
 398744300 PISTON GUIDE Used for installing piston in cylinder.
G07669214
 18261AA010 VALVE OIL SEAL GUIDE Used for press-fitting of intake valve guide oil seals and exhaust valve guide oil seals.
G09475848
 18350AA000 CONNECTING ROD BUSHING REMOVER AND INSTALLER Used for removing and installing connecting rod bushing.
G04998585
 499977500 CAM SPROCKET WRENCH Used for removing and installing CAM sprocket.
G04997561
 499587200 CRANKSHAFT OIL SEAL INSTALLER
  • Used for installing crankshaft oil seal.
  • Used together with CRANKSHAFT OIL SEAL GUIDE (499597100).
G04997569
 499597100 CRANKSHAFT OIL SEAL GUIDE
  • Used for installing crankshaft oil seal.
  • Used together with CRANKSHAFT OIL SEAL INSTALLER (499587200).
G04997570
 499718000 VALVE SPRING REMOVER Used for removing and installing valve spring.
G05018648
 499765700 VALVE GUIDE REMOVER Used for removing valve guides.
G05018649
 499765900 VALVE GUIDE REAMER Used for reaming valve guides.
G05018651
 18252AA000 CRANKSHAFT SOCKET Used for rotating crankshaft.
G04997553
 498277200 STOPPER SET Used for preventing the torque converter from falling when removing and installing the engine.
G05667735
 499585700 OIL SEAL GUIDE Used for installing the chain cover oil seal.
G05667730
 18251AA050 VALVE GUIDE ADJUSTER Used for installing intake valve guides.
G05667731
 18251AA060 VALVE GUIDE ADJUSTER Used for installing exhaust valve guides.
G05667732
 18355AA000 PULLEY WRENCH
  • Used for removing and installing the crank pulley.
  • Used for removing and installing the idler sprocket.
  • Used together with PULLEY WRENCH PIN SET (18334AA000).
G05667733
 18334AA000 PULLEY WRENCH PIN SET
  • Used for removing and installing the crank pulley.
  • Used for removing and installing the idler sprocket.
  • Used together with PULLEY WRENCH (18355AA000).
G04997325
 42099AE000 QUICK CONNECTOR RELEASE Used for disconnecting the quick connector of the fuel delivery tube and FUEL HOSE (42075AG690).
NOTE: FUEL HOSE (42075AG690) is used for checking the fuel pressure.
G05031183
 18471AA000 FUEL PIPE ADAPTER Used for inspecting the fuel pressure.
G05031184
 42075AG690 FUEL HOSE Used for inspecting the fuel pressure.
NOTE: This is the SUBARU genuine part.
G06649686
 18360AA020 HANGER Used for removing and installing engine.
G10289719
 - SUBARU SELECT MONITOR 4 Used for setting of each function and troubleshooting for electrical system.
NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to "Application help".
scientia non olet · About LEMON Manuals