Front Exhaust Pipe: Assembly

WARNING: This page is about a different variant/trim than selected.

Install each cover to the front exhaust pipe.
Tightening torque:

13 N.m (1.3 kgf-m, 9.6 ft-lb)
Install the front oxygen (A/F) sensor and rear oxygen sensor. Ref. to INSTALLATION , Front Oxygen (A/F) Sensor. Ref. to INSTALLATION , Rear Oxygen Sensor.
Install the front exhaust pipe (RH) to the front exhaust pipe (LH).

NOTE: Use a new gasket.

Tightening torque:

30 N.m (3.1 kgf-m, 22.1 ft-lb)