Diagnostic Method 1
WARNING: This page is about a different variant/trim than selected.
Detect the malfunction depending on the average value of time necessary for λ to inverse the air fuel ratio from "Lean → Rich → Lean" to "Rich → Lean → Rich".
Judge as NG when the following conditions are established.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value | DTC |
|---|---|---|
| Average value of time necessary for λ to inverse the air fuel ratio to Lean → Rich → Lean | > 220 ms | P015A and P015C |
| and | ||
| Average value when λ is lean | > 320 ms | |
| Average value of time necessary for λ to inverse the air fuel ratio to Rich → Lean → Rich | > 200 ms | P015B and P015D |
| and | ||
| Average value when λ is rich | > 300 ms |
Time needed for diagnosis: 90000 ms
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.