Execution Condition
WARNING: This page is about a different variant/trim than selected.
EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Soaking time | ≥ 21600 s |
| Block heater judgment | Completed |
| Block heater operation | Not in operation |
EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Engine coolant temperature | ≥ 75 °C (167 °F) |
| Integrated value of intake air amount | ≥ Value of Map 1 |
| Number of experiences under following driving conditions | ≥ 3 time(s) |
|
≥ 15 s |
| Vehicle speed and | ≥ 40 km/h (24.9 MPH) |
| Amount of intake air | ≥ 10 g/s (0.35 oz/s) |
|
≥ Value from Map 2 |
| Vehicle speed | < 4 km/h (2.5 MPH) |
MAP 1 VALUE SPECIFICATION
| Engine coolant temperature °C (°F) | -20 (-4) | -10 (14) | 0 (32) | 10 (50) | 20 (68) |
| Intake air amount sum value g (oz) | 50000 (1763.5) | 7400 (261) | 6600 (232.78) | 5800 (204.57) | 5000 (176.35) |
MAP 2 VALUE SPECIFICATION
| Engine coolant temperature °C (°F) | -30 (-22) | 0 (32) | 10 (50) | 20 (68) |
| Duration of driving condition 2 (sec) | 250 | 40 | 32 | 15 |