DTC P1C00: Battery Monitor Module "A" Performance: Notes
WARNING: This page is about a different variant/trim than selected.
DTC detecting condition:
Immediately at fault recognition
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode Ref. to
OPERATION
, Clear Memory Mode and Inspection Mode Ref. to
PROCEDURE
, Inspection Mode.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DTC. Check for DTC. Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) |
Is P1C00 displayed in present fault? | Replace the battery sensor. Ref. to BATTERY SENSOR | Even if DTC is detected, it has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again. |