Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
- Idle speed diagnosis
Judge as NG when the following conditions are established.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Actual engine speed - Targeted engine speed | < Value of Map 4 |
MAP 4 VALUE SPECIFICATION
| Engine coolant temperature °C (°F) | -40 (-40) | -30 (-22) | -20 (-4) | - 10 (14) | 0 (32) | 10 (50) | 20 (68) | 30 (86) | 40 (104) | 50 (122) | 60 (140) |
| Threshold Value rpm | -235 | -235 | -235 | -235 | -235 | -285 | -300 | -300 | -260 | -260 | -260 |
Time needed for diagnosis: 7000 ms
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.
- Final ignition timing diagnosis
Judge as NG when the following conditions are established.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Final ignition timing - Ignition timing during CSERS * *: Ignition timing during CSERS (Cold Start Emission Reduction Strategy) = Base ignition timing - Retard amount |
> Value of Map 5 |
MAP 5 VALUE SPECIFICATION
| Engine coolant temperature at engine starting °C (°F) | -40 (-40) | -30 (-22) | -20 (-4) | -10 (14) | 0 (32) | 10 (50) | 20 (68) | 30 (86) | 40 (104) | 50 (122) | 60 (140) |
| Threshold Value °CA | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Time needed for diagnosis: 7000 ms
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.