Execution Condition
WARNING: This page is about a different variant/trim than selected.
EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Battery voltage | ≥ 10.9 V |
| Barometric pressure | ≥ 75.1 kPa (563 mmHg, 22.2 inHg) |
| Main feedback | In operation |
| Engine speed | > 1200 rpm and < 3400 rpm |
| Engine load change every 0.5 engine revs. | > 0.8 g/rev (0.03 oz/rev) |
| Not under catalyst neutralization control and Not under a gradual change process (duration time) |
≥ 500 ms |
EXECUTION CONDITION
| Secondary parameters | Execution condition |
|---|---|
| Misfire monitoring status | In operation |
| Accelerator pedal position | = 0% |
| Vehicle speed | ≤ 2 km/h (1.2 MPH) |
| Engine speed | > 475 rpm and < 1050 rpm |
| Main feedback | In operation |
| Engine load change every 0.5 engine revs. | > 0 g/rev (0 oz/rev) and < 1000 g/rev (35.27 oz/rev) |