LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Cooling System (H6DO)) >> Reservoir Tank >> Installation

Reservoir Tank: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the bolts securing the reservoir tank to the radiator fan shroud.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  2. Insert the over flow hose (A) connected to the radiator filler neck into the reservoir tank.
Fig 1: Identifying Over Flow Hose Reservoir Tank Bolts
G10264213Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals