LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Cooling System (H6DO)) >> Radiator Fan and Fan Motor Assembly >> Assembly >> Radiator Sub Fan And Sub Fan Motor

Radiator Sub Fan And Sub Fan Motor

WARNING: This page is about a different variant/trim than selected.
  1. Install the radiator sub fan motor to the radiator fan shroud.

    Tightening torque: 

    3.9 N.m (0.4 kgf-m, 2.9 ft-lb) 

  2. Install the radiator sub fan to the radiator sub fan motor.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb) 

  3. Connect the connector to the radiator fan control module (sub), and install the radiator sub fan motor harness.
scientia non olet · About LEMON Manuals