LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System (H4DO) >> Rear Exhaust Pipe >> Removal

Rear Exhaust Pipe: Removal

CAUTION: Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
  1. Lift up the vehicle.
  2. Remove the bolts, springs, and nuts securing the center exhaust pipe to the rear exhaust pipe.
    Fig 1: Locating Center And Rear Exhaust Pipe Nuts Bolts
    G08317713Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolts and self-locking nuts securing the mufflers to the rear exhaust pipes.
    CAUTION: Be careful not to drop the rear exhaust pipe.
    Fig 2: Locating Muffler And Rear Exhaust Pipe Nuts Bolts
    G10262949Courtesy of SUBARU OF AMERICA, INC.
  4. Apply a coat of spray type lubricant to the mating area of cushion rubber.
  5. Remove the rear exhaust pipe from the cushion rubber.
    CAUTION: Be careful not to let the muffler contact the rear bumper.
    Fig 3: Locating Rear Exhaust Pipe Cushion Rubber
    G10262950Courtesy of SUBARU OF AMERICA, INC.