LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (H4DO) >> Engine Coolant >> Replacement >> Draining Of Engine Coolant

Draining Of Engine Coolant

  1. Lift up the vehicle.
  2. Remove the under cover. Ref. to REMOVAL , Front Under Cover.
  3. Connect a hose with inner diameter of ø8 mm (0.315 in) to the drain outlet of the radiator.
  4. Loosen the drain plug to drain engine coolant into a container.
    NOTE: Remove the radiator cap so that engine coolant will drain faster.
    Fig 1: Identifying Radiator Drain Outlet
    G10262971Courtesy of SUBARU OF AMERICA, INC.
  5. Tighten the drain plug.
    NOTE: Use new O-rings.
  6. Remove the hose from the drain outlet of the radiator.
  7. Install the under cover. Ref. to INSTALLATION , Front Under Cover.
scientia non olet · About LEMON Manuals