Body Integrated Unit: Removal

Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. <Ref. to BATTERY , NOTE, Repair Contents.>
Remove the cover assembly - instrument panel LWR driver. <Ref. to REMOVAL , Instrument Panel Lower Cover.>
Remove the panel - knee guard.

Fig 1: Locating Knee Guard Panel Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the body integrated unit (fuse & relay box).
1. Disconnect the connector.
2. Remove the bolts and nuts, and remove the body integrated unit (fuse & relay box).
Fig 2: Locating Body Integrated Unit Bolts And Nuts
Courtesy of SUBARU OF AMERICA, INC.