TFT display check
Check the TFT display.
NOTE:
- The meter needle indicate 0 or the lowest position.
- ILL indication illuminates at the same brightness as immediately before entering "TFT display check".
- After No. 6 is displayed in the illumination order, display is repeated from No. 1 again.
- The version display contents of the illumination order No. 1 varies depending on the vehicle.
- Press the trip reset switch.
- After a buzzer sounds for 0.5 seconds and "STEP3" is displayed on TFT, the TFT display check mode is initiated.
| Order | TFT display | Warning/indicator light | Time (sec) |
|---|---|---|---|
| 1 | Version display & black | Light OFF | 10 |
| 2 | Red Light | OFF | 10 |
| 3 | Green Light | OFF | 10 |
| 4 | Blue Light | OFF | 10 |
| 5 | White Light | OFF | 10 |
| 6 | Color gradation | Light OFF | 10 |