Inspection Using Can Diagnostic
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK BODY INTEGRATED UNIT REGISTRATION STATUS. Check that settings of body integrated unit correspond to vehicle equipment. <Ref. to REGISTRATION BODY INTEGRATED UNIT .> |
Does the vehicle equipment correspond to settings? | Go to step 2 . | Match the settings of the body integrated unit with the vehicle equipment. |
| 2 CHECK BODY INTEGRATED UNIT CUSTOMIZE SETTING. Check that settings of body integrated unit correspond to vehicle condition. <Ref. to USER CUSTOMIZING .> |
Do the customize settings correspond to the vehicle condition? | Go to step 3 . | Match the settings of the body integrated unit with the vehicle condition. |
| 3 CHECK FACTORY INITIAL SETTING OF BODY INTEGRATED UNIT. Confirm «Factory initial setting» of body integrated unit registrations is set to «Market». <Ref. to REGISTRATION BODY INTEGRATED UNIT .> |
Is it set to «Market»? | In the Basic Diagnostic Procedure, Go to step 4 . | Switch from «Factory» to «Market». |