Diagnostic Method (Turbo Model)

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria

Threshold Value

|Engine speed - Measured primary pulley shaft speed x Primary reduction gear ratio⁽¹⁾|

< Table 4 RPM

⁽¹⁾	Primary reduction gear ratio: 1.129

ENGINE SPEED SPECIFICATION

Engine speed (RPM)	0	500	1000	1500	2000	2500	3000	3500
\|Engine speed - Measured primary pulley shaft speed x Primary reduction gear ratio\| (RPM)	0	0	50	50	50	50	50	50

Engine speed (RPM)	4000	4500	5000	5500	6000	6500	7000
\|Engine speed - Measured primary pulley shaft speed x Primary reduction gear ratio\| (RPM)	50	50	50	50	50	50	50

Time needed for diagnosis: 10 seconds

Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.