DTC P2750 Intermediate Shaft Speed Sensor "C" Circuit Range/Performance: Notes

DTC detecting condition: 

Immediately at fault recognition

Trouble symptom: 

• Shifting shock is felt.
• Acceleration is poor during standing start.
• Shift control malfunction

1. CHECK DTC. 

   Read the DTC using Subaru Select Monitor.

   Besides DTC P2750, is DTC P2747 or P2751 displayed?

   • Yes  : Perform the diagnosis according to DTCs other than P2750.
   • No  : Perform the diagnosis according to DTC P2751. Ref. to TRANSMISSION (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC P2751 INTERMEDIATE SHAFT SPEED SENSOR "C" CIRCUIT NO SIGNAL .