Diagnostic Method (Turbo Model)
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Diagnosis 1 | |
| Measured primary pulley shaft speed/Measured secondary pulley shaft speed | < 0.33 or > 2.58 |
| Diagnosis 2 | |
| Measured secondary pulley shaft speed | > 9900 RPM |
Time needed for diagnosis: 5 seconds
Malfunction indicator light illumination: Illuminates as soon as a malfunction occurs.