DTC P2746 Intermediate Shaft Speed Sensor "B" Circuit Range/Performance: Notes

DTC detecting condition: 

Immediately at fault recognition

Trouble symptom: 

• Standing start problems
• Shock occurs when engaging the lockup clutch.
• Shock occurs when selecting shift position.

1. CHECK DTC. 

   Read the DTC using Subaru Select Monitor.

   Besides DTC P2746, is any of the DTCs P2747, U0100 and U0401 displayed?

   • Yes  : Perform the diagnosis according to DTCs other than P2746.
   • No  : Perform the diagnosis according to DTC P2747. Ref. to TRANSMISSION (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC P2747 INTERMEDIATE SHAFT SPEED SENSOR "B" CIRCUIT NO SIGNAL .