Diagnostic Method (Non-Turbo Model)
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Diagnosis 1 | |
| (Measured primary pulley shaft speed/Measured secondary pulley shaft speed) | < 0.36 or > 2.80 |
| Diagnosis 2 | |
| Measured primary pulley shaft speed | > 7140 RPM |
Time needed for diagnosis: 5 seconds
Malfunction indicator light illumination: Illuminates as soon as a malfunction occurs.