Execution Condition (Turbo Model)

Secondary Parameters	Execution condition
Diagnosis 1
12 V battery system voltage	≥ 10 V
Transmission range	Drive
Measured secondary pulley shaft speed	≥ 100 RPM
Measured output shaft speed	≥ 100 RPM
Commanded forward & reverse clutch pressure control solenoid current	< 0.9 A
Engine speed	≥ 400 RPM
Diagnosis 2
12 V battery system voltage	≥ 10 V
Transmission range	Drive
Measured output shaft speed	< 100 RPM
Commanded forward & reverse clutch pressure control solenoid current	< 0.9 A
Accelerator pedal position (from ECM)	> 6%
Engine speed	≥ 400 RPM