Diagnostic Method (Non-Turbo Model)

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

JUDGMENT VALUE SPECIFICATION

Malfunction Criteria	Threshold Value
Measured line pressure	< Map 1 kPa

MAP SPECIFICATION (1)


		500	1000	1500	2000	2500	3000
Transmission fluid temperature (degC)	-40	0	340	404	478	558	643
	-20	0	340	404	478	558	643
	0	0	324	382	454	532	616
	20	0	366	425	490	565	649
	40	0	345	400	466	536	613
	60	0	341	389	447	512	591
	80	0	319	371	429	488	571
	100	0	298	356	412	476	551
	120	0	271	329	384	451	519
	140	0	243	302	357	425	487

		Engine speed (RPM)
		3500	4000	4500	5000	5500	6000	6500
Transmission fluid temperature (degC)-	40	751	883	1042	1167	1264	1292	1274
	- 20	751	883	1042	1167	1264	1342	1424
	0	722	840	991	1135	1240	1319	1395
	20	751	861	1000	1160	1258	1350	1417
	40	708	817	943	1103	1223	1312	1385
	60	677	779	906	1064	1187	1266	1339
	80	652	748	874	1000	1135	1223	1299
	100	629	719	831	947	1069	1181	1251
	120	593	678	780	880	990	1109	1171
	140	557	637	728	813	911	1037	1090

Time needed for diagnosis: 5 seconds

Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.