Diagnostic Method
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| |Target primary pulley shaft speed - Measured primary pulley shaft speed| | ≥ 600 RPM |
| (Commanded duty of shift up pressure control solenoid | ≥ 90% |
| or | |
| Commanded duty of shift down pressure control solenoid) | ≥ 90% |
Time needed for diagnosis: 5 seconds
Malfunction indicator light illumination: Illuminates as soon as a malfunction occurs.