DTC P0717 Input/Turbine Shaft Speed Sensor "A" Circuit No Signal: Notes

DTC detecting condition: 

Immediately at fault recognition

Trouble symptom: 

• No lock-up occurs.
• Shock occurs when selecting shift position.
• Shift control malfunction

1. CHECK DTC. 

   Read the DTC using Subaru Select Monitor.

   Besides DTC P0717, is DTC P0500 displayed?

   • Yes  : Perform the diagnosis according to DTCs other than P0717.
   • No  : Perform the diagnosis according to DTC P0716. Ref. to TRANSMISSION (DIAGNOSTICS)>Diagnostic Procedure with Diagnostic Trouble Code (DTC)>DTC P0716 INPUT/TURBINE SHAFT SPEED SENSOR "A" CIRCUIT RANGE/PERFORMANCE .