Transmission Rear CROSSMEMBER And Rear Cushion Rubber

1. Disconnect the ground cable from battery.
2. Lift up the vehicle.
3. Remove the center exhaust pipe. Ref. to EXHAUST(H4DOTC)>Center Exhaust Pipe>REMOVAL .
4. Remove the center exhaust cover.
   Fig 1: Identifying Transmission Mounting Center Exhaust Cover

   Courtesy of SUBARU OF AMERICA, INC.
5. Set the transmission jack under the transmission. Make sure that the support plate of transmission jack does not touch the oil pan.
6. Remove the transmission rear crossmember.
   Fig 2: Locating Transmission Rear Crossmember Bolts

   Courtesy of SUBARU OF AMERICA, INC.
7. Remove the rear cushion rubber.

Fig 3: Locating Rear Cushion Rubber Bolts

Courtesy of SUBARU OF AMERICA, INC.