LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr690) >> Transmission Harness >> Inspection

Transmission Harness: Inspection

  1. Visually check the harness and connector for damage or crack.
  2. Check the harness terminal for rust, disconnection or poor contact.
  3. Check the continuity between harness terminals and oil temperature sensor.
    NOTE: Refer to WIRING SECTION for transmission harness terminal and oil temperature sensor terminal. Ref. to WIRING SYSTEM>CVT Control System>WIRING DIAGRAM .

    Harness continuity standard 

    Less than 1 Ω

    Oil temperature sensor standard 

    Approx. 2.6 kΩ (at 20°C)

scientia non olet · About LEMON Manuals