LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle (Tr690) >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

  1. Start and warm up the engine.
  2. Shift the select lever to "P" or "N" range.
  3. Depress the brake pedal and hold it.
  4. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is idling. Ref. to TRANSMISSION (DIAGNOSTICS)>Subaru Select Monitor>OPERATION .

    Standard 

    Approx. 0.8 V

  5. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is stopped and the ignition switch is turned on. Ref. to TRANSMISSION (DIAGNOSTICS)>Subaru Select Monitor>OPERATION .

    Specification: 

    Approx. 0.5 V

scientia non olet · About LEMON Manuals