Front Reduction Drive Gear: Assembly

Using the ST, install the ball bearing to front reduction drive gear.
NOTE: Use a new ball bearing.

ST 18651AA000 INSTALLER

Fig 1: Installing Front Reduction Drive Gear Ball Bearing Using Special Tool
Courtesy of SUBARU OF AMERICA, INC.
Using ST1 and ST2, install the ball bearing to front reduction drive gear.
NOTE: Use a new ball bearing.

ST1 499757002 INSTALLER

ST2 398177700 INSTALLER

Fig 2: Installing Front Reduction Drive Gear Ball Bearing Using Special Tools
Courtesy of SUBARU OF AMERICA, INC.
Install the seal rings.
NOTE:
- Use new seal rings.
- When installing the seal rings, do not expand the seal rings too much.
- Install the O-ring when installing the torque converter assembly.

Fig 3: Locating Front Reduction Drive Gear Seal Ring

Courtesy of SUBARU OF AMERICA, INC.