CVTF Cooler (With Warmer Function): Installation

Connect the engine coolant inlet hose.
NOTE: When installing the engine coolant inlet hose, the triangle marking should face upward.

Fig 1: Locating Engine Coolant Inlet Hose
Courtesy of SUBARU OF AMERICA, INC.
Install the insulator, EGR valve, and the intake manifold. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Intake Manifold>INSTALLATION . Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>EGR Control Valve>INSTALLATION .
Replace the CVTF inlet hose and the outlet hose.
Install the CVTF cooler (with warmer feature).
Tightening torque:

23 N.m (2.3 kgf-m, 17.0 ft-lb)

Fig 2: Locating CVTF Cooler Hose Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the engine coolant outlet hose, engine coolant inlet hose, CVTF inlet hose and CVTF outlet hose.
NOTE: Use new CVTF hoses.

Fig 3: Locating Engine Coolant Outlet, Inlet And CVTF Hoses
Courtesy of SUBARU OF AMERICA, INC.
Check installation condition of hoses.
- Make sure the hoses do not interfere with each other or with other components.
- Check each hose for bent, excess curve, and twisting conditions.
Install the harness clip.

Fig 4: Identifying CVTF Cooler (With Warmer Function)
Courtesy of SUBARU OF AMERICA, INC.
Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>Intercooler>INSTALLATION .
Connect the battery ground terminal.
Fill engine coolant. Ref. to COOLING(H4DOTC)>Engine Coolant>REPLACEMENT .
Adjust the CVTF level. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>CVTF>ADJUSTMENT .