Wheel Balancing

NOTE:

Unbalance after adjusting the wheel balancing should be 5 g (0.18 oz) or less.
When using the adhesive type weight, degrease the surface where the adhesive type weight will be applied securely.
After applying the adhesive type weight, apply a force to the weight and attain full adhesion.
Using the knock-on type weight, check the size of the knock-on part.

Fig 1: Checking Knock Type Weight Dimensions For Steel And Aluminum Wheels

Courtesy of SUBARU OF AMERICA, INC.

Service limit A:

Knock-on type weight for steel wheel: 2 mm (0.08 in)

Knock-on type weight for aluminum wheel: 5 mm (0.2 in)