LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires, Wheels & Tire Pressure Monitoring System (TPMS) >> Tire Pressure Monitoring System >> Removal >> TPMS & Keyless Control Module

TPMS & Keyless Control Module

NOTE: TPMS control module is integrated with the keyless entry control module.
  1. Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, remove the ground terminal from battery sensor.
  2. Remove the trim panel - rear apron. Ref. to EXTERIOR/INTERIOR TRIM>Rear Quarter Trim>REMOVAL .
  3. Remove the TPMS & keyless control module.
    1. Disconnect the connector.
    2. Remove the bolt and then remove the TPMS & keyless control module.
Fig 1: Locating TPMS And Keyless Control Module Bolt
G10408655Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals