Bushing A - Trailing Link

1. Before assembly, inspect the following items and replace any faulty part with a new one.
   • Perform visual check for damage or bend on the trailing link.
   • Visually check the bushing for abnormal cracks, fatigue or damage.
2. Using the ST-A and ST-B, press-fit the bushing.

Preparation tool: 

ST-A: BUSHING REMOVER (20099FG000)

ST-B: INSTALLER & REMOVER (base) (20099PA010)

Fig 1: Installing Rear Trailing Link Bushing Using Special Tools

Courtesy of SUBARU OF AMERICA, INC.