LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Suspension >> Front Suspension >> Wheel Alignment >> Inspection >> Camber

Wheel Alignment: Inspection: Camber

  1. Place the front wheel on the turning radius gauge.
    NOTE: Make sure the ground contact surfaces of the front and rear wheels are at the same height.
  2. Set the adapter into the center of wheel, and then set the wheel alignment gauge.
    Fig 1: Installing Adapter Into Front Wheel Center (Camber)
    G11267361Courtesy of SUBARU OF AMERICA, INC.
  3. Measure the camber angle in accordance with the operation manual for wheel alignment gauge.
Tire size Camber (difference between RH and LH 45' or less)
P225/60R17
P225/55R18		 -0°00'±0°45'
scientia non olet · About LEMON Manuals