Bushing Front - Front Arm

1. Before assembly, inspect the following items and replace any faulty part with a new one.
   • Check the front arm assembly for damage or cracks, and replace if defective.
   • Visually check the bushing for abnormal cracks, fatigue or damage.
   • Visually check the dust cover on the ball joint for damage.
2. Align the alignment mark on the front arm assembly to the split portion of the bushing intermediate plate of the busing front - front arm.
3. Using the ST and a press, assemble the busing front - front arm.

Preparation tool: 

ST: INSTALLER & REMOVER SET (927680000)

Fig 1: Assembling Front Arm Bushing Using Special Tool And Press

Courtesy of SUBARU OF AMERICA, INC.