Steering Warning Light Does Not Go Off

Detecting condition: 

• Defective combination meter
• Open circuit of harness

Trouble symptom: 

When starting the engine, the STEERING warning light continues to illuminate.

1. CHECK DTC. 

   Read the DTC of the power steering control module using the Subaru Select Monitor. Ref. to POWER STEERING (DIAGNOSTICS)>Read Diagnostic Trouble Code (DTC) .

   Is DTC detected?

   • Yes  : Perform the diagnosis according to DTC. Ref. to POWER STEERING (DIAGNOSTICS)>List of Diagnostic Trouble Code (DTC) .
   • No  : Go to 2. 
2. CHECK LAN SYSTEM. 

   Perform the diagnosis for LAN system using the Subaru Select Monitor. Ref. to LAN SYSTEM (DIAGNOSTICS)>Basic Diagnostic Procedure .

   Is a DTC related to CAN communication detected?

   • Yes  : Perform the diagnosis according to DTC. Ref. to LAN SYSTEM (DIAGNOSTICS)>List of Diagnostic Trouble Code (DTC) .
   • No  : Check the combination meter. Ref. to INSTRUMENTATION/DRIVER INFO>Combination Meter System>INSPECTION .