Seat Belt Inner - Front
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION
.
- Turn the ignition switch to OFF.
- Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>NOTE>BATTERY
.NOTE:
- For model with battery sensor, disconnect the ground terminal from battery sensor.
- For the seat with lifter, lift the seating face before removing the seat.
- For the power seat, remove the slide rail installing bolt before removing the battery ground.
- Remove the front seats. Ref. to SEATS>Front Seat>REMOVAL .
- Remove the seat belt inner - front.
- Remove the nut, and remove the seat belt inner - front.
- Remove the clip for the inner seat belt harness located under the seat cushion.