LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt System >> Front Seat Belt >> Installation >> Seat Belt Inner - Front

Seat Belt Inner - Front

CAUTION:
  • Before installation, make sure that the correct part is used.
  • During installation, make sure that the seat belts are not twisted.
  • Check that there is no pinching of the seat belt harness. Wrong harness rooting may cause the harness short from pinch.
  • Do not forget the wave washer, when installing front seat inner belt assembly.
  1. Install the seat belt inner - front.

    Tightening torque: 

    Front seat belt: Ref. to SEAT BELT SYSTEM>General Description>COMPONENT>FRONT SEAT BELT .

  2. Locate the seat belt harness and retain it with a harness clip.
    Fig 1: Locating Front Seat Belt Inner Nut
    G08316366Courtesy of SUBARU OF AMERICA, INC.
  3. Install the seat assembly to the body. Ref. to SEATS>Front Seat>INSTALLATION .
  4. Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
  5. Check that no harness is caught by sliding the seat back and forth.
scientia non olet · About LEMON Manuals