LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Satellite Safing Sensor >> Installation

Satellite Safing Sensor: Installation

CAUTION:
  • Do not reuse the bolt and nut.

    Always replace with the specified new bolts and nuts.

  • When installing the cover - satellite safing, push the cover securely until it contacts the floor panel.
  • If the cover - satellite safing is too loose at its mounting portion to remove easily, replace with a new cover - satellite safing.
  • After installing the cover - satellite safing, make sure that the sensor harness does not get caught.
  1. Before installation, inspect the following items and replace any faulty part with a new one.
    • The satellite safing sensor connector is damaged.
    • The cover - satellite safing is damaged.
    • Side airbag or curtain airbag has been activated.
  2. Install the satellite safing sensor.

    Tightening torque: 

    7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

  3. Install the remaining parts in the reverse order of removal.
  4. Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
scientia non olet · About LEMON Manuals