LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Inspection Locations after a Collision >> Inspection >> Side Airbag Module

Side Airbag Module

  1. Side impact (side airbag module activated)
    1. Replace the following parts with new ones.
      • Airbag control module
      • Satellite safing sensor
      • Cover - satellite safing
      • Front door impact sensor (collision side)
      • Seat belt pretensioner (collision side/if deployed)
      • Side airbag module (operating side)
      • Side airbag sensor (collision side)
      • Curtain airbag module (operating side)
      • Curtain airbag sensor (collision side)
      • Pad assembly - front seat backrest (collision side)
      • Frame assembly - front backrest (collision side)
      • Cover COMPL - front backrest (collision side)
      • Frame assembly - front seat cushion (collision side)
      • Trim panel - roof assembly
      • Trim panel for each pillar
    2. Visually inspect the following items and replace any damaged part with a new one.
      • Headrest assembly
      • Bushing - lock headrest
      • Slide rail assembly - OUT
      • Slide rail assembly - INN
      • Cover - hinge front seat
      • Knob - lifter
      • Lever - reclining
      • Harnesses and connectors on body side that are linked to the replaced parts
  2. Side impact (side airbag module not activated)

    Visually inspect the following items and replace any damaged or cracked part with a new one.

    Specially inspect the damage of airbag module body, mounting bracket and harness connector.

    • Pad assembly - front seat backrest
    • Frame assembly - front backrest
    • Cover COMPL - front backrest
    • Satellite safing sensor
    • Cover - satellite safing
    • Front door impact sensor
    • Side airbag module
    • Side airbag sensor
    • Curtain airbag module
    • Curtain airbag sensor
  3. No side impact

    Visually inspect the airbag modules for contamination and replace any faulty part with a new one.