Driver's Airbag Module Assembly

1. Replace the following parts with new ones.
   • Airbag control module
   • Driver's airbag module
   • Knee airbag module
   • Passenger's airbag module (if deployed)
   • Side airbag module (right and left/if deployed)
   • Curtain airbag module (right and left/if deployed)
   • Seat belt pretensioner (right and left)
   • Lap seat belt pretensioner (passenger's side only)
   • Front sub sensor (right and left)
   • Instrument panel assembly (because it is integrated with passenger's airbag module) (if passenger's airbag module is deployed)
   • Steering wheel
   • Column assembly - steering
   • Roll connector
   • Pad assembly - front seat backrest (if the side airbag is deployed)
   • Frame assembly - front seat cushion (if the side airbag is deployed)
   • Frame assembly - front seat backrest (if the side airbag is deployed)
   • Cover COMPL - front backrest (if the side airbag is deployed)
   • Trim panel - roof assembly (if the curtain airbag is deployed)
   • Trim panel of each pillar (if the curtain airbag is deployed)
2. Visually inspect the following items and replace any damaged part with a new one.
   • Universal joint assembly - steering:
   • Steering gearbox
   • Beam COMPL - steering
   • Harnesses and connectors on body side that are linked to the replaced parts

Visually inspect the following items and replace any damaged or cracked part with a new one.

Specially inspect the damage of airbag module body, mounting bracket and harness connector.

• Driver's airbag module
• Knee airbag module
• Passenger's airbag module
• Seat belt pretensioner (right and left)
• Lap seat belt pretensioner (passenger's side only)
• Front sub sensor (right and left)
• Instrument panel assembly (because it is integrated with passenger's airbag module)

Visually inspect the airbag modules for damage or contamination and replace any faulty part with a new one.