LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Inspection Locations after a Collision >> Inspection >> Curtain Airbag Module

Curtain Airbag Module

  1. Side impact or roll over (curtain airbag module activated)
    1. Replace the following parts with new ones.
      • Airbag control module
      • Satellite safing sensor
      • Cover - satellite safing
      • Side airbag module (operating side)
      • Side airbag sensor (collision side)
      • Curtain airbag module (operating side)
      • Curtain airbag sensor (collision side)
      • Seat belt pretensioner (operating side)
      • Front door impact sensor (collision side)
      • Pad assembly - front seat backrest (collision side)
      • Frame assembly - front backrest (collision side)
      • Cover COMPL - front backrest (collision side)
      • Frame assembly - front seat cushion (collision side)
      • Trim panel - roof assembly
      • Trim panel for each pillar
      • Airbag bracket (model with sunroof) (collision side)
    2. Visually inspect the following items and replace any damaged part with a new one.
      • Assist rail - front and rear
      • Bracket - assist rail front and rear
      • Harnesses and connectors on body side that are linked to the replaced parts
  2. Side impact (curtain airbag module not activated)

    Visually inspect the following items and replace any damaged or cracked part with a new one.

    Specially inspect the damage of airbag module body, mounting bracket and harness connector.

    • Trim panel - roof assembly
    • Trim panel for each pillar
    • Curtain airbag module
    • Satellite safing sensor
    • Cover - satellite safing
    • Front door impact sensor
    • Side airbag sensor
    • Curtain airbag sensor
  3. No side impact or roll over

    Visually inspect the airbag modules for damage or contamination and replace any faulty part with a new one.