LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Front Sub Sensor >> Removal

Front Sub Sensor: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION .
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  3. Remove the bumper face - front. Ref. to EXTERIOR/INTERIOR TRIM>Front Bumper>REMOVAL .
    NOTE: When removing the front sub sensor, remove the bumper beam COMPL - front as necessary.
  4. Remove the bolt, and then detach the front sub sensor. Ref. to AIRBAG SYSTEM>Airbag Connector>PROCEDURE>FRONT SUB SENSOR, FRONT DOOR IMPACT SENSOR AND SATELLITE SAFING SENSOR .
Fig 1: Removing Front Sub Sensor
G08316389Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals