Curtain Airbag Sensor: Installation
CAUTION:
- Do not reuse the bolt and nut.
Always replace with the specified new bolts and nuts.
- When installing the sensor, insert the set pin on the backside of the sensor into the hole on the body side securely.
- Before installation, inspect the following items and replace any faulty part with a new one.
- Curtain airbag sensor or connector is damaged.
- Curtain airbag module has been activated.
- Install the curtain airbag sensor.
Tightening torque:
7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
- Install the remaining parts in the reverse order of removal.
Tightening torque:
Rear seat backrest assembly: Ref. to SEATS>General Description>COMPONENT>REAR SEAT .
- Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .