Airbag Control Module: Installation

CAUTION: Do not reuse the bolt and nut.
Always replace with the specified new bolts and nuts.

Before installation, inspect the following items and replace any faulty part with a new part.
- Control module is deformed.
- Control module connector is damaged.
- Control module mounting bracket is damaged.
Install each part in the reverse order of removal.
Tightening torque:

Airbag control module: 25 N.m (2.55 kgf-m, 18.4 ft-lb)

Console box assembly: 6.5 N.m (0.66 kgf-m, 4.8 ft-lb)
Connect the battery ground terminal. Ref. to NOTE>NOTE>BATTERY .
NOTE: After connecting the battery sensor terminal, place the select lever in the "P" position.