LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Airbag Connector >> Procedure >> Driver's Airbag Module (Roll Connector)

Driver's Airbag Module (Roll Connector)

  1. How to disconnect:
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Pull the slide lock (a) in the direction of arrow.
    2. With the slide lock pulled, disconnect the connector.
    Fig 1: Disconnecting Driver Airbag Module(Roll Connector)
    G10270438Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

    Holding the connector, push it in securely until a clicking sound is heard.

Fig 2: Connecting Driver Airbag Module Connector
G10270439Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals