LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System (Diagnostics) >> Airbag Control Module I/O Signal >> Electrical Specification

Electrical Specification

Fig 1: Identifying Airbag Control Module Connector Terminals
G06653235Courtesy of SUBARU OF AMERICA, INC.
Item Control module terminal No.
Ignition power supply Dedicated fuse (1) - 21
Passenger's airbag module level one + (1) - 4
- (1) - 3
Passenger's airbag module level two + (1) - 1
- (1) - 2
Driver's airbag module level one + (1) - 5
- (1) - 6
Driver's airbag module level two + (1) - 8
- (1) - 7
Driver's knee airbag module + (1) - 9
- (1) - 10
Batch operation tool (1) - 16
CAN-H (1) - 13
CAN-L (1) - 22
Front sub sensor LH + (1) - 30
- (1) - 28
Front sub sensor RH + (1) - 29
- (1) - 27
Ground line (GND) (1) - 25
(1) - 26
Passenger's airbag ON indicator (1) - 23
Passenger's airbag OFF indicator (1) - 17
Passenger's seat belt warning (1) - 15
Telematics communication line (1) - 24
Side airbag sensor LH
Curtain airbag sensor LH
Front door impact sensor LH
+ (2) - 24
- (2) - 23
Seat belt pretensioner LH + (2) - 5
- (2) - 6
Side airbag module LH + (2) - 1
- (2) - 2
Curtain airbag module LH + (2) - 8
- (2) - 7
Occupant detection control module + (3) - 16
- (3) - 24
Side airbag sensor RH
Curtain airbag sensor RH
Front door impact sensor RH
+ (3) - 17
- (3) - 18
Side airbag module RH + (3) - 8
- (3) - 7
Curtain airbag module RH + (3) - 1
- (3) - 2
Seat belt pretensioner RH + (3) - 4
- (3) - 3
Lap seat belt pretensioner RH + (3) - 13
- (3) - 14
Satellite safing sensor + (3) - 20
- (3) - 19